行业动态
NEWS
公司动态
常见问题
热门产品
PRODUCT
制作扳手毛坯的改进,将材料加热由以前的煤加热或油加热改为电加热;之前的压型由守旧的摩擦压力机改为精锻机或模锻锤。...
扳手力矩就是力和距离的乘积,在紧固螺丝螺栓螺母等螺纹紧固件时需要控制施加的力矩大小,以螺纹紧固且不至于因力矩过大破坏螺纹。...
扳手的滚齿、插齿与铣齿比较铣齿采用普通设备和简单刀具即可加工齿形。但是只能加工11~9级精度、齿面粗糙度Ra值为6.3μm~3.2μm的齿形。...
扳手经滚磨光整加工后表面光洁铮亮,其表层的活跃金属分子暴露在空气中很快氧化变黑,继而生锈,原因清洗后留在零件表面上的水膜形成了电化学腐...
硬度试验:其六角或十二角对边尺寸小于或等于32mm时,其硬度应为39-48HRC。套筒六角或十二角对边尺寸大于32mm小于或等于55mm时,其硬度应为35-44HRC。...